|
热塑性聚氨酯弹性体 TPU, TPU POLYCASA® TPU是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
TPU 87A, 降噪, 良好的撕裂强度, 耐磨损性, 衬里
POLYCASA® TPU
热塑性聚氨酯弹性体
Polycasa
Technical Data
产品说明
Polycasa TPU (Thermoplastic Polyurethane) is a brand name for TPU extruded sheets produced by Polycasa.
The sheet can be delivered in flat sheets, palletised, or alternatively in rolls, as per customers requirements. This product offers superior abrasion resistance, tear resistance and other advanced mechanical properties.
CHARACTERISTICS
• Extreme resistance to wear and tear.
• Reduction of noise.
• Repair/replacement indicator layer: (After wearing out, the black abrasion layer reveals a red indicator layer, signalling it should be repaired or replaced. This is key to preventative maintenance and allows for better production planning by avoiding unforeseen downtime, resulting in increased productivity.)
APPLICATIONS
• Conveyor belt armouring.
• Wear liners for: chutes, truck liners, cyclones, magnetic separators, cones and rotary mills.
Polycasa TPU can be installed either by mechanical fastening or by using polyurethane glue on metal, wooden or concrete surfaces.
Once bonded to a metal surface, maintenance of TPU is very simple. The damaged surface is ground out, cleaned and the new TPU patch can be bonded into the damaged area. Repair work takes less than an hour to complete and can be carried out in the absence of a clean environment. Therefore, repairs can be done underground, for example in the mine. This means machinery does not have to be brought to the surface, reducing maintenance and repair time.
Polycasa TPU is 100% recyclable, therefore all side cuts can be reused.
总体
材料状态 • 已商用：当前有效
资料 1 • Technical Datasheet (English)
供货地区 • 北美洲 • 拉丁美洲 • 亚太地区
• 非洲和中东 • 欧洲
特性 • 降噪 • 抗撞击性，高 • 良好的撕裂强度
• 降噪 • 可回收材料 • 耐磨损性良好
用途 • Abrasion Resistant Liners • 衬里
• 保护性遮盖物 • 传送机
形式 • 片材
加工方法 • 挤出
物理性能 额定值单位制 测试方法
密度 1.20g/cm³ ISO 1183
机械性能 额定值单位制 测试方法
抗张强度 3 (极限) 50.0MPa DIN 53504
拉伸应变 (断裂) 600% DIN 53504
Tensile Storage Modulus ISO 6721
-20°C 186MPa
20°C 51.0MPa
60°C 37.0MPa
抗磨损性 15.0mm³ ISO 4649
弹性体 额定值单位制 测试方法
撕裂强度 70kN/m ISO 34-1
冲击性能 额定值单位制 测试方法
Impact Resilience 42% ISO 4662
硬度 额定值单位制 测试方法
肖氏硬度 (邵氏 A) 87 ISO 868
热塑性聚氨酯弹性体 TPU, TPU POLYCASA® TPU是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
